Joan Bess is the person I thank for launching in my head a new-to-me technique. I loved the concept she introduced so much that I decided to take it one step farther. Her recent post -- at http://gelliarts.blogspot.com -- demonstrates creating a textured paper to use both as a tool and as a final artwork, with the Gelli Plate. Using a squeeze bottle of textured paint and a sheet of paper, Joan opted for a freehand-drawn approach to making this tool. I decided to add another step, at the very start:
First, I used masking tape to secure my 9"X12" stencil Mimosa to a sheet of previously painted newsprint. Then I began to outline the design with a watercolor pencil --
|Above shows the stencil in full.|
|The above close-up shows the blue outlines as they are being drawn around each part of the design, by tracing the open edges of the stencil.|
|Above: The stencil has been removed; the watercolor pencil lines remain.|
|Above: The outlining with textured paint has begun. It's just a matter of following the lines drawn with watercolor pencil. I felt no need to be exactly faithful to each of those original lines.|
|Above: The textured outlines have been completed; now comes an important step --|
Once I started printing with my Gelli Plate -- I used the 12" X 14" plate since my large Mimosa stencil measures 9"X12" -- the process was quick and easy. With a brayer, I spread open acrylic paint over the plate, then pressed the textured paper face-down onto the wet paint. When I pulled the paper up, it had collected some of the paint, and it had left an imprint.
I repeated this process several times with new layers of paint, continuing until I had pulled a number of prints.
Having previously used the Gelli Plate with the Mimosa stencil itself -- not an outlined version created from the stencil -- I could immediately see the difference between the two in terms of results. I'm pleased with the results I've achieved both the original way -- using the stencil itself -- and this new way.
Some of the "new-way" prints are shown below.
|Above is one of the original new-way prints.|
To show a comparison with the "old-way" Gelli Plate prints, created by using the stencil itself instead of a texture-outlined version, I'll include the images below --
For anyone puzzled by my term "the old way," I'm talking about brayering the Gelli Plate print with open acrylic, then placing an original stencil onto the plate. The stencil is then lifted, leaving its imprint on the plate. Next, a sheet of paper is pressed onto the plate, and pulled. The above two images were achieved this way. Variety is the spice of life!
Last but not least, here is the paper I had treated with texture paint. This is how it appears now that it has been used multiple times with the Gelli Plate. It was a tool, but now it's artwork :
My 9"X12" stencil Mimosa is available at www.StencilGirlProducts.com.
So is my 6"X6" Mimosa. Thanks for visiting!