Monday, December 30, 2019


I was happy to see one of my stencils, 6" x 6" Pressed Leaves, used here today; MaryBeth Shaw chose it, along with other StencilGirl stencils, for developing that impressive, multi-layered art journal page.  

6" x 6" Pressed Leaves

Happy New Year!  

Wednesday, December 18, 2019

Christmas Decorations made with Stencils

Altho Christmas greeting cards are the thrust of today's post, I need to add that these ideas also work as ways to decorate giftbags and to create gift-tags.

The first 3 cards below were made with the same cardstock that I described in my Dec. 15 post -- it's a sturdy cardstock with tiny embedded particles (perhaps ground mica) that reflect light, making a jazzy frame for any decoration to be added.

I buy most of my greeting card blanks from  This one measures just under 6"x 6"... and perfectly fits my  6"x 6" stencil.  And its corresponding envelope is exactly 6" x 6", which means there is a surcharge for mailing it.  I handle this problem by using two regular postal stamps.

Sturdy cardstock is important when the greeting card cover has to easily support coarse modeling paste mixed with silver metallic powder -- which is what I used in today's first 2 cards:


The card above was made with my 6"x 6" stencil BUDDING BRANCHES.

The above Christmas card was made with my 6"x 6" stencil Swaying Grasses.

The above card was made with part of my 9" x 12" stencil Queen Anne's Lace.

I created today's top 2 cards using an art spatula to spread coarse modeling paste (mixed with silver mica powder) thru the stencil openings.  After the paste dried, I added highlights with glitter glue.

My approach to the third card, made with a portion of Queen Anne's Lacewas to spray acrylic paint thru the stencil openings.  Since this stencil measures 9"x 12", I masked off portions of the stencil to keep them from showing.  The same finishing touch was used on this third Christmas card, altho you may have to click on the image to enlarge it, to better see the glitter glue.

Acrylic spray paint is available on store shelves, but I make my own, so I can mix custom colors.  (See the photo below.)  I buy spray bottles at drug stores (in the traveling supplies section); then I fill them with a mix of acrylic liquid paint, water and airbrush medium.  The ratio of water to acrylic liquid paint varies, depending on whether I want to end up with a heavy spray or a light one.  The amount of airbrush medium never varies -- it's always just a few drops per spray bottle.  I clean the spray nozzles after each use.  But if they clog between uses, anyway, then I use rubbing alcohol to clear them.

Because the dark bronze metallic cardstock is just that -- very dark -- I sometimes line the insides of the cards with lightweight papers, cut to fit.  

What the inside of my cards looks like, after the light paper is added.

At times, I skip that step and, instead, use white markers or pens to fill out the inside of these greeting cards.

Today's last Christmas card was made with my 4"x 4" Fern Fronds Silhouette Mini Stencil:

I made this final card by spreading heavy-body metallic silver acrylic paint across the stencil, on a substrate of dark blue paper.  Once the paint dried, I cut out the image with decorative Friskar scissors.  After gluing this to a white greeting card blank with an extra-strong gluestick, I outlined it with glitter glue.  I also used glitter on the red center of the candle's flame.  

Thanks for stopping by today!  To scroll thru the pages of my stencils and masks at, please start here.

Monday, December 9, 2019

More Christmas Cards

Today's post starts with this Christmas card -- 

The above Christmas card was created with Winter Berries Mask; I used it both in creating the background as well as decorating the textured foil rectabngle that forms the pillar candle.

Winter Berries Mask itself looks like this --

The next card in today's post took more time to develop.

First, I gathered prints I'd made with two 6" x 6" stencils --  Marbles 6 stencil and Sprigs.

Secondly, copying an idea from a commercial greeting card, I drew three Magi on scrap paper.

My third step was to cut out each of the scrap paper figures.  One at a time, I used these as patterns -- I placed them over the stencil-prints and traced around their edges with colored pencils that matched the colors that had been used in printing them.  (Matching colors make the tracing lines look less obvious.)

Next, I used fine-detail scissors to cut out the shapes of the Magi from the stencil-prints.

I glued them to the cover of a greeting card blank to make the card below --

The far-left and far-right Magi were cut from prints made with 6" x 6" stencil Sprigs --

And the center Magi was cut from a print made using 6" x 6" Marbles 6 stencil...

The star was a freehand cut-out.  Or you can join StencilClub and buy the star-themed 3-part stencil set by Mary C. Nasser, which came out August 2017.

Thanks for visiting here today!  To scroll thru the pages of my StencilGirl stencils, please start here.

To follow this blog by email, please use that option in the upper right sidebar.

Wednesday, December 4, 2019

More Giftbags

Today's first art sample is a giftbag decorated with a print on red foil cardstock, made with silver metallic acrylic paint and my 4" x 4" stencil Fern Fronds Silhouette Stencil Mini.

After using my Pioneer brand Embellishment Gluestick to add this cut-out to the white giftbag, I added a flourish using Rangers Industries' glitter glue.  Below is an enlargement showing part of the flourish.

Altho it's not visible in the next two photos below, I used the same glitter glue to add similar flourish lines around the trees--

The giftbag above features cut-outs from prints made with my 6" x 6" stencil Sprigs* and (the bottom layer of the tree) Sassy Spray*, another 6" x 6" stencil.  And the glue glitter embellished giftbag below features a cut-out from a print I made on gold and white marbled paper, using my 6" x 6" stencil Mimosa 6and I like to think this pattern makes a good Christmas tree!

Above:  another giftbag decorated with a print made with silver metallic acrylic paint and my 4" x 4" stencil Fern Fronds Silhouette Stencil Mini.

*In their entirety, Sprigs and Sassy Spray look like this:

Sassy Spray

Thanks for stopping here today!  To scroll thru the pages of my StencilGirl stencils and masks, please start here.